Product Type:
Color Body Porcelain
Digital Print Technology
Fray Metal (Fragment)
Fray Metal (Fragment)
Select from product options below to view larger images and installation photos.
- Product Details
- More Information
- Tech Specs
Product DetailsMore InformationTech Specs
Stocked Colors:
Fray Metal Black
Fray Metal Gray
Fray Metal White
Stocked Sizes:
12 x 24
2 x 2 Mosaic Mesh (0.9588 sf/sht)
Stocked Trim:
3 x 12 Surface Bullnose
Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa
*2 × 2 Mosaic Mesh Only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The Fray Metal series is an American-made porcelain tile. Blending delicate elegance fused with an urban appeal, the look of this design combines the texture of linen with a shimmering effect of metal elements. Because this material is a porcelain product, minimal maintenance is required. This series is suitable for residential and commercial applications.
There can be noticeable variances between pieces, so it is important and recommended that a range of this product be viewed before finalizing a purchase. When mixing sizes within a series, shade, texture and calibration differences should be expected. Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color.
For proper bonding, LFT/LHT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
| TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
|---|---|---|---|
| DYNAMIC COEFFICIENT OF FRICTION | ANSI A326.3 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
| VISIBLE ABRASION RESISTANCE | ASTM C1243 | REQUIRED | RESISTANT |
| CHEMICAL RESISTANCE | ASTM C650 | REQUIRED | RESISTANT |
| FROST RESISTANCE | ASTM C1026 | REQUIRED | RESISTANT |
| WATER ABSORPTION | ASTM C373 | ≤ 0.5% | ≤ 0.5% |
| BREAKING STRENGTH | ASTM C648 | ≥ 250 lb/ft² | ≥ 350 lb/ft² |
DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
Installation Gallery
