Invictus Vein Cut

Invictus Vein Cut

Select from product options below to view larger images and installation photos.
Clear
Product Brochure

Order a sample

$5.00

Orders placed Monday-Friday will be processed within 48 hours.

Disclaimer: Samples are only available to be shipped to: AZ, CA, CO, HI, ID, MT, NV, NM, OK, OR, TX, UT, WA, WY.

Product Details

Product Type:
Rectified Color Body Porcelain
Digital Print Technology

PRODUCT CONTAINS
≥20% PRE-CONSUMER
RECYCLED CONTENT

Stocked Colors:
Invictus Beige Vein Cut
Invictus Ivory Vein Cut
Invictus Pearl Vein Cut
Invictus White Vein Cut

Stocked Finishes:
Matte (M)
Polished (P)
R11 Anti-Slip Finish

Stocked Sizes:
12 x 24 (M, P)
24 x 48 (M, P)
24 x 48 R11 Anti-Slip Finish
24 x 48 Rigato (M)(Wall Only)
2 x 2 Mosaic Mesh (M)
(0.9684 sf/sht)
4 Inch Hex Mesh (M, P)
(1.119 sf/sht)
Large Chevron Mesh (M, P)
(0.8285 sf/sht)

Stocked Trim:
3 x 12 SBN (M, P)

Recommended Uses:
Commercial
Residential
*Interior Floor
**Exterior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
***Shower Floors
Steam Showers
Pool & Spa

*Excludes 24 x 48 Rigato, wall only item
**24 x 48 R11 Anti-Slip Finish Only
***Matte 2 x 2 Mosaic Mesh, 4 Inch Hex Mesh and 24 x 48 R11 Anti-Slip Finish Only

DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

More Information

The Invictus series is an Italian-made rectified color body porcelain. Created using digital print technology, the Invictus porcelain tile design resembles a vein cut travertine. You have several finish options with the desirable 24 × 48 large format tile size including matte, polished, R11 Anti-Slip Finish for exterior flooring as well as a decorative Rigato that offers a textural element to your space. The Rigato has a unique texture, similar to a combed surface.

This series is suitable for residential and commercial applications. Because this material is a porcelain product, minimal maintenance is required. There can be noticable variances between pieces, so it is important and recommended that a range of this product be viewed before finalizing a purchase.

Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications.

Grout release is recommended for the polished finish, prior to grouting so grout powders do not fill pores in the tile surface, which can attract dirt when walked upon. It is recommended to use a coordinating grout color for all polished porcelain, contrasting grout colors are not recommended. For proper bonding, LHT/LFT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.

Tech Specs
TECHNICAL CHARACTERISTICS NORM EXPECTED LIMIT VALUES TYPICAL VALUE
DYNAMIC COEFFICIENT OF FRICTION ANSI A326.3 DYNAMIC WET ≥ 0.42 DYNAMIC WET MATTE ≥ 0.42

DYNAMIC WET POL. N/A

VISIBLE ABRASION RESISTANCE UNI EN ISO 10545-07 REQUIRED RESISTANT
CHEMICAL RESISTANCE UNI EN ISO 10545-13 REQUIRED RESISTANT
FROST RESISTANCE UNI EN ISO 10545-12 REQUIRED RESISTANT
WATER ABSORPTION UNI EN ISO 10545-03 ≤ 0.5% ≤ 0.1%
BREAKING STRENGTH UNI EN ISO 10545-04 > 1300 N > 1300 N

DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally-recognized testing.

Safety Data Sheet (SDS)

Visit The Slab Yard

Browse our products online or in-person.
Online Inventory

BRING YOUR IDEAS TO LIFE

Design a one-of-a-kind tile or create your custom space.
Just Imagine

Showroom Experience

See and touch extraordinary, hand selected surfaces.
Store Locations

You may also like