Metalwood

Metalwood

Select from product options below to view larger images and installation photos.
Clear
Product Brochure

Order a sample

$5.00

Orders placed Monday-Friday will be processed within 48 hours.

Disclaimer: Samples are only available to be shipped to: AZ, CA, CO, HI, ID, MT, NV, NM, OK, OR, TX, UT, WA, WY.

Product Details

Product Type:
Rectified Color Body Porcelain

PRODUCT CONTAINS
≥20% PRE-CONSUMER
RECYCLED CONTENT

Stocked Colors:
Metalwood Argento
Metalwood Carbonio
Metalwood Iridio
Metalwood Platino

Stocked Sizes:
12 x 24
2 x 2 Mosaic Mesh (0.9588 sf/sht)

Stocked Trim:
3-1/2 x 24 Surface Bullnose

Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa

*2 x 2 Mosaic only

DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

More Information

The Metalwood series is a rectified color body porcelain which has a subtle metallic striation design on the face of the tile. This series adds a beautiful textural aesthetic to any design project. Also, it’s versatility in applications range from the most original building of modern architecture to the restoration of classic buildings. Metalwood is specifically designed with commercial applications in mind and suitable for dry, wet or humid spaces. In addition it is ideal for high traffic applications and can withstand significant physical-chemical stress. And because this material is a porcelain product, minimal maintenance is required.

Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications.

For proper bonding, LFT/LHT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.

33offset_12x24_Black.jpeg

Tech Specs

 

TECHNICAL CHARACTERISTICS NORM EXPECTED LIMIT VALUES TYPICAL VALUE
DYNAMIC COEFFICIENT OF FRICTION ANSI A137.1:2012 DYNAMIC WET ≥ 0.42 DYNAMIC WET ≥ 0.42
VISIBLE ABRASION RESISTANCE UNI EN ISO 10545-06 REQUIRED RESISTANT
CHEMICAL RESISTANCE UNI EN ISO 10545-13 REQUIRED RESISTANT
FROST RESISTANCE UNI EN ISO 10545-12 REQUIRED RESISTANT
WATER ABSORPTION UNI EN ISO 10545-03 ≤ 0.5% ≤ 0.05%
BREAKING STRENGTH UNI EN ISO 10545-04  > 1300 N > 1300 N

DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

Safety Data Sheet (SDS)

Visit The Slab Yard

Browse our products online or in-person.
Online Inventory

BRING YOUR IDEAS TO LIFE

Design a one-of-a-kind tile or create your custom space.
Just Imagine

Showroom Experience

See and touch extraordinary, hand selected surfaces.
Store Locations

You may also like