Product Type:
Rectified Glazed Porcelain
Digital Print Technology
Oro Gate
Oro Gate
Select from product options below to view larger images and installation photos.
- Product Details
- More Information
- Tech Specs
Product DetailsMore InformationTech Specs
Stocked Colors:
Oro Gate
Stocked Sizes:
24 x 36
24 x 36 R11 Anti-Slip Finish
2 x 2 Mosaic Mesh (0.9588 sf/sht)
Recommended Uses:
Commercial
Residential
Interior Floor
*Exterior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
**Shower Floors
Steam Showers
Pool & Spa
*24 x 36 R11 Anti-Slip Finish Only
**2 x 2 Mosaic Mesh and R11 Anti-Slip Finish Only
DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
Oro Gate is a rectified glazed porcelain offered in both matte and R11 Anti-Slip Finishes. This porcelain tile offers a lot of variation to mimic the quartzite natural stone this product is inspired by. Because this material is a porcelain product, minimal maintenance is required. There will be noticeable variances in color and movement between pieces. Therefore, it is important and recommended that a range of this product be viewed before finalizing a purchase.
Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. This series is suitable for residential and commercial applications.
For proper bonding, LHT/LFT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required
| TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
|---|---|---|---|
| DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1 : 2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
| VISIBLE ABRASION RESISTANCE | ISO 10545-07 / ASTM C1027 | REQUIRED | RESISTANT |
| CHEMICAL RESISTANCE | ISO 10545-13 / ASTM C650 | REQUIRED | RESISTANT |
| FROST RESISTANCE | ISO 10545-12 / ASTM C1026 | REQUIRED | RESISTANT |
| WATER ABSORPTION | ISO 10545-03 / ASTM C373 | ≤ 0.5% | ≤ 0.05% |
| BREAKING STRENGTH | ISO 10545-04 / ASTM C648 | ≥ 250 lb/ft² | ≥ 702 lb/ft² |
DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally recognized testing.
Installation Gallery
