Product Type:
Rectified Color Body Porcelain
Digital Print Technology
PRODUCT CONTAINS
≥27% PRE-CONSUMER
RECYCLED CONTENT
Canyon
Canyon
Select from product options below to view larger images and installation photos.
- Product Details
- More Information
- Tech Specs
Product DetailsMore InformationTech Specs
Stocked Colors:
Black
Brown
Grey
Ivory
Stocked Finishes:
Matte
R11 Anti-Slip Finish
Stocked Sizes:
12 x 24
24 x 24
24 x 48
24 x 48 R11 Anti-Slip Finish
2 x 2 Mosaic Mesh (0.9684 sf/sht)
Straight Stack 1 x 24 Mesh
(1.9368 sf/sht)
Hex 16 x 18 Mesh (1.4795 sf/sht)
Stocked Trim:
3 x 12 Surface Bullnose
Recommended Uses:
Commercial
Residential
Interior Floor
*Exterior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
**Shower Floors
Steam Showers
Pool & Spa
*24 x 48 R11 Anti-Slip Finish Only
**2 x 2 Mosaic Mesh and 24 x 48 R11 Anti-Slip Finish Only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The Canyon series is an Italian-made rectified color body porcelain that is available in two finishes, including the R11 Anti-Slip Finish. Created using digital print technology, this durable porcelain tile has a variety of tones that mimics the look of slate. This product is a truthful representation of a natural slate, with all its natural traits, including shade variation, as well as structural and saw-cut effects.
Because this material is a porcelain product, minimal maintenance is required. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications.
For proper bonding, LFT/LHT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
| TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
|---|---|---|---|
| DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1:2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
| VISIBLE ABRASION RESISTANCE | ISO 10545-07 | REQUIRED | RESISTANT |
| CHEMICAL RESISTANCE | ISO 10545-13 | REQUIRED | RESISTANT |
| FROST RESISTANCE | ISO 10545-12 | REQUIRED | RESISTANT |
| WATER ABSORPTION | ISO 10545-03 | ≤ 0.5% | ≤ 0.1% |
| BREAKING STRENGTH | ISO 10545-04 | S ≥ 1300 N : R ≥ 35 N/mm² | S ≥ 1300 N : R ≥ 35 N/mm² |
DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally recognized testing.
Installation Gallery
