Product Type:
Rectified Color Body Porcelain
Digital Print Technology
PRODUCT CONTAINS
≥20% PRE-CONSUMER
RECYCLED CONTENT
Stocked Colors:
CityLife Ash
CityLife Beige
CityLife Sand
CityLife Tin
Stocked Sizes:
12 x 24
36 x 36
24 x 48
2 x 2 Mosaic Mesh (0.9588 sf/sht)
Stocked Trim:
3 x 12 Surface Bullnose
Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa
*2 x 2 Mosaic Mesh Only
Product Video:
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The CityLife series is an Italian-made rectified color body porcelain tile available in four neutral colors and four sizes. Created using digital print technology, offers an organic aesthetic to your environment with soft patterning and subtle veining featured across the surface of each color.
Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications. Because this material is a porcelain product, minimal maintenance is required.
For proper bonding, LFT/LHT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
| TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
|---|---|---|---|
| DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1:2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
| VISIBLE ABRASION RESISTANCE | UNI EN ISO 10545-07 | REQUIRED | RESISTANT |
| CHEMICAL RESISTANCE | UNI EN ISO 10545-13 | REQUIRED | RESISTANT |
| FROST RESISTANCE | UNI EN ISO 10545-12 | REQUIRED | RESISTANT |
| WATER ABSORPTION | UNI EN ISO 10545-03 | ≤ 0.5% | ≤ 0.5% |
| BREAKING STRENGTH | UNI EN ISO 10545-04 | ≥ 35 N/mm² | 50.8 N/mm² |
DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
