Product Type:
Ceramic (2 x 12)
Porcelain (All other sizes)
S-Series
S-Series
- Product Details
- More Information
- Tech Specs
Stocked Colors:
S-Black (1″ Hex only)
S-Black/Canvas White (1″ Hex only)
S-Canvas White
S-Cloud Blue
S-Gallery Grey
S-Halo Grey
S-Soft Sage
S-Vintage Grey
Stocked Finishes:
Glossy (G)
Matte (M)
Stocked Sizes:
1″ Hex Mesh (M) (0.936 sf/sht)
2 x 6 Herringbone Mesh (G)
(0.947 sf/sht)
2 x 6 Staggered Mesh (G)
(0.947 sf/sht)
2 x 12 (G)
Penny Round Mesh (G, M)
(0.969 sf/sht)
*Picket Mesh (G) (0.969 sf/sht)
Scallop Mesh (G) (1.001 sf/sht)
*Available in Canvas White, Gallery Grey, Halo Grey and Vintage Grey only
Recommended Uses:
Commercial
Residential
**Interior Floor
Interior Wall
***Exterior Cladding
Fireplaces
Shower Walls
****Shower Floors
Steam Showers
***Pool & Spa
**Excludes 2 x 12 & Scallop
***Excludes 2 x 12
****1″ Hex & Penny Round only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The S-Series tile is a versatile collection with classic shapes and colors which are ideal for a variety of beautiful installations. The 2 × 12 ceramic tile and the Scallop (raised design) are for wall use only. All shapes and sizes of mesh mounted products can be installed on a wide variety of surfaces. The scallop has variation in color/glaze which is inherent and adds to the character of multi-dimensional tiles.
Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. Color may vary between sizes and shapes, therefore it is recommended to view current tile samples.
When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications. Because these products are all porcelain or ceramic, minimal maintenance is required.
TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
---|---|---|---|
DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1:2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
VISIBLE ABRASION RESISTANCE | UNI EN ISO 10545-06 | REQUIRED | RESISTANT |
CHEMICAL RESISTANCE | UNI EN ISO 10545-13 | REQUIRED | RESISTANT |
FROST RESISTANCE | UNI EN ISO 10545-12 | REQUIRED | RESISTANT |
WATER ABSORPTION | UNI EN ISO 10545-03 | ≤ 0.5% | ≤ 0.5% |
BREAKING STRENGTH | UNI EN ISO 10545-04 | ≥ 1300 N | ≥ 1220 N |
DCOF applies to porcelain mesh mounts only, excludes wall tile 2 x 12 and Scallop.
DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.