Product Type:
Rectified Color Body Porcelain
Digital Print Technology
Lagos
Lagos
- Product Details
- More Information
- Tech Specs
Stocked Colors:
Lagos Concrete
Lagos Ivory
Lagos Light Grey
Lagos Mud
Lagos Sand
Stocked Sizes:
12 x 24
24 x 48
4 inch Hex Mesh (0.86 sf/sht)
2 x 2 Mosaic Mesh (0.9588 sf/sht)
Stocked Trim:
3 x 12 Surface Bullnose
Special Order Items: These items are subject to longer lead times and possibly minimum order quantities. Please contact your Sales Representative or any Arizona Tile location for more details.
Special Order:
24 x 36 x 2cm Paver R11 Anti-Slip Finish (Light Grey color only)
Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa
*2 × 2 Mosaic Mesh and 4 inch Hex Mesh Only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The Lagos series is an Italian-made rectified color body porcelain. Created using digital print technology, its pattern mimics the look of natural limestone, enhancing its organic appearance. Given the wide selection of color options available in the series, Lagos offers the timeless appeal of natural stone with the practical properties of porcelain tile. Unlike limestone, minimal maintenance is required. Clean, rectified edges accommodate narrower grout joints thereby giving the illusion of an uninterrupted, honed surface.
Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture, and calibration differences should be expected. This series is suitable for residential and commercial applications.
For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
---|---|---|---|
DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1:2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
VISIBLE ABRASION RESISTANCE | ISO 10545-06 | ≤ 175mm³ | RESISTANT |
CHEMICAL RESISTANCE | ISO 10545-13 | REQUIRED | RESISTANT |
FROST RESISTANCE | ISO 10545-12 | REQUIRED | RESISTANT |
WATER ABSORPTION | ISO 10545-03 | ≤ 0.5% | ≤ 0.1% |
BREAKING STRENGTH | ISO 10545-04 | ≥ 35 N/mm² | 45.6 N/mm² |
DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.