Product Type:
Rectified Color Body Porcelain
Digital Print Technology
Terrazzo
Terrazzo
- Product Details
- More Information
- Tech Specs
Stocked Colors:
Terrazzo Black
Terrazzo Cream
Terrazzo Grey
Terrazzo Pearl
Terrazzo White
Stocked Sizes:
24 x 24
2 x 2 Mosaic Mesh (0.9588 sf/sht)
4 Inch Hex Mesh (0.86 sf/sht)
Stocked Trim:
3 x 24 Surface Bullnose
Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa
*2 × 2 Mosaic Mesh and 4 Inch Hex Mesh Only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
Terrazzo is a porcelain product with a flecked pattern that is offered in a variety of neutral colors. Contributing to the resurgence of mid-century design, Terrazzo adds a clean and modern appeal reminiscent of classic modern architecture. Terrazzo pairs well with a variety of natural materials, creating installations that are contemporary and unique.
Piece to piece variation in shade or color is inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications.
For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
---|---|---|---|
DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1:2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
VISIBLE ABRASION RESISTANCE | UNI EN ISO 10545-06 | ≤ 175mm³ | ≤ 150mm³ |
CHEMICAL RESISTANCE | UNI EN ISO 10545-13 | REQUIRED | RESISTANT |
FROST RESISTANCE | UNI EN ISO 10545-12 | REQUIRED | RESISTANT |
WATER ABSORPTION | UNI EN ISO 10545-03 | ≤ 0.5% | ≤ 0.1% |
BREAKING STRENGTH | UNI EN ISO 10545-04 | ≥ 35 N/mm² | ≥ 40 N/mm² |
DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
Safety Data Sheet (SDS)