Product Type:
Rectified Color Body Porcelain
PRODUCT CONTAINS
>30% PRE-CONSUMER
RECYCLED CONTENT
Product Type:
Rectified Color Body Porcelain
PRODUCT CONTAINS
>30% PRE-CONSUMER
RECYCLED CONTENT
Stocked Colors:
Tivoli Beige
Tivoli Bianco
Tivoli Grigio
Tivoli Nero
Tivoli Noce
Stocked Sizes:
12 x 24
18 x 36
2 x 2 Mosaic Mesh
(0.9588 sf/sht)
Stocked Trim:
3 x 12 Surface Bullnose
Special Order Items: These items are subject to longer lead times and possibly minimum order quantities. Please contact your Sales Representative or any Arizona Tile location for more details.
Special Order:
24 x 36 x 2cm Paver R11 Anti-Slip Finish (Beige color only)
Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
Steam Showers
*Shower Floors
Pool & Spa
*2 x 2 Mosaic Mesh Only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
Tivoli is a rectified color body porcelain tile. It provides a natural, travertine stone look with the ease of caring for porcelain tile. It is available in two sizes. Because this material is a porcelain product, minimal maintenance is required. This series is suitable for residential and commercial applications. Piece to piece variation in shade or color are inherent in all fired clay products; therefore it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color.
For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1:2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
VISIBLE ABRASION RESISTANCE | UNI EN ISO 10545-07 | REQUIRED | RESISTANT |
CHEMICAL RESISTANCE | UNI EN ISO 10545-13 | REQUIRED | RESISTANT |
FROST RESISTANCE | UNI EN ISO 10545-12 | REQUIRED | RESISTANT |
WATER ABSORPTION | UNI EN ISO 10545-03 | ≤ 0.5% | ≤ 0.03% |
BREAKING STRENGTH | UNI EN ISO 10545-04 | ≥ 35 N/mm² | 48.4 N/mm² |
DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.