Product Type:
Rectified Color Body Porcelain
Digital Print Technology
More Wood
More Wood
Select from product options below to view larger images and installation photos.
- Product Details
- More Information
- Tech Specs
Product DetailsMore InformationTech Specs
Stocked Colors:
More Wood Ciliegio
More Wood Grigio
More Wood Miele
More Wood Noce
Stocked Finishes:
Matte
R11 Anti-Slip Finish
The R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.
Stocked Sizes:
8 x 32
8 x 32 R11 Anti-Slip Finish
8 x 48
Special Order Items: These items are subject to longer lead times and possibly minimum order quantities. Please contact your Sales Representative or any Arizona Tile location for more details.
Special Order:
16 x 48 x 2cm Paver R11 Anti-Slip Finish
24 x 24 x 2cm Paver R11 Anti-Slip Finish
Recommended Uses:
Commercial
Residential
Interior Floor
*Exterior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa
*8 x 32 R11 Anti-Slip Finish Only
DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The More Wood Series is a rectified color body porcelain. It is the synthesis of digital technology applied to aesthetic research. Giving the appearance of natural wood, this series provides warmth to any space. Because this material is a porcelain product, minimal maintenance is required.
More Wood Series is available in two sizes, 8 x 32 and 8 x 48. It is available in four colors and two finishes: matte and R11 Anti-Slip Finish. The R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.
Piece to piece variation in shade or color is inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture, and calibration differences should be expected. This series is suitable for residential and commercial applications.
For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
| TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
|---|---|---|---|
| DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1:2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
| VISIBLE ABRASION RESISTANCE | UNI EN ISO 10545-07 | REQUIRED | RESISTANT |
| CHEMICAL RESISTANCE | UNI EN ISO 10545-13 | REQUIRED | RESISTANT |
| FROST RESISTANCE | UNI EN ISO 10545-12 | REQUIRED | RESISTANT |
| WATER ABSORPTION | UNI EN ISO 10545-03 | ≤ 0.5% | ≤ 0.5% |
| BREAKING STRENGTH | UNI EN ISO 10545-04 | > 1300 N | > 1300 N |
DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally recognized testing.
P.E.I Rating: 4
Safety Data Sheet (SDS)
Installation Gallery
